Solution

Which problems can not be repaired by LCD Bonding Machine ?
2020-01-08 06:16:55

TAB COF Bonding Machine is used to replaced the TAB COF, to solve the problems caused by COF damage or loose, like Vertical color line and horizontal color lines,etc.While not all the TV Laptop LCD problem can be solved by the LCD Bonding Machine, as below for your reference.

1.Broken

2.Leakage.Even if you use the special means to repair it, the problem will appear soon.
 
3.Y axis vertical external COF drive, the corresponding area can not be repaired usually.is usually not repair the failure, but this is not absolute，only individual can be repaired by special means.
 
4.Screen internal short circuit or open circuit:The probability of this happening is relatively low, and can only be repaired by LASER machine.
TAB COF Bonding
TAB COF Bonding MachineTFT LCD LASER Repair MachinePolarizer Film DelaminatorPolarizer Film LaminatorLCD Bonding ToolsAccessory & Spare PartTAB COF Driver IC
Rework & Reballing
BGA Rework StationSoldering Station & Hot Air GunBGA IC ChipsBGA Reballing ToolsRelated PCBA Repair Tools
Automated Equipment
Automatic Soldering RobotGlue DispenserConformal Coating MachineScrew Fastening MachineLaser Marking MachineOther Equipment
LCD OCA Machines
Accessory & Spare PartsLCD SeparatorOCA Glue RemoverOCA Film Stick MachineOCA LaminatorAir Bubble Remover
Tester & Programmer
Testing ToolsiPhone ProgrammerUniversal ProgrammerMultimeterOscilloscopeDC Power Supply
Other Electric Tools
ScrewdriverUltrasonic CleanerFume ExtractorMicroscopeESD

Copyright 2019 © MSTOOLS Electronic CO.,LTD. All Right Reserved.

 About US | Solution | News | Support | Contact